Snow Pads for Series I™ Shoes

The Series I“glue-on” horseshoe can be used with conventional snow pads in the snow & ice. The integral, ¼-inch thick, concave-relieved rim-pad allows the use of a standard snow pad. A unique, added feature is that this Sound Horse horseshoe easily allows the farrier/owner/trainer to install and remove the snow pad without removing the horseshoe.

Castle Plastics 1/8 inch thick Snow Pad
Castle Plastics 1/8 inch thick Snow Pad
Use Shaped Shoe as a Template -- OR
Use Shaped Shoe as a Template — OR
Trace the Shoe Outline onto Snow Pad
Trace the Shoe Outline onto Snow Pad
Cut inside the traced line by 5/8 – 3/4 inch
Cut inside the traced line by 5/8 – 3/4 inch
Pad can be cut with sheet metal shears
Pad can be cut with sheet metal shears
New & Trimmed (used) Snow Pad
New & Trimmed (used) Snow Pad
Heat the Trimmed Snow Pad
Heat the Trimmed Snow Pad
Flex the Snow Pad
Flex the Snow Pad
Insert the Snow Pad
Insert the Snow Pad
Snow Pad Seated in Horseshoe
Snow Pad Seated in Horseshoe
Snow Pad seated in the Series I horseshoe
Snow Pad seated in the Series I horseshoe
Remove Snow Pad
Remove Snow Pad

[divider_flat]

This is a fast, simple and reliable system utilizing a readily available snow pad. The pictured pad on the far right was left on a horse for over two weeks. This horse is turned out and ridden every day.