Series III™ PLUS – Plate Assembly

1. Start with Series III cuff and PLUS plate
2. Trace the shape you want onto plate
2. Trace the shape you want onto plate
3. Cut the plate with a handheld jig saw
3. Cut the plate with a handheld jig saw
4. The cut piece can be deburred & the toe rolled
4. The cut piece can be deburred & the toe rolled
5. A farrier rasp will do the job
5. A farrier rasp will do the job
6. Grind the plate where the cuff will attach
6. Grind the plate where the cuff will attach
7. Grind the cuff (lightly)
7. Grind the cuff (lightly)
8. Place spacers on the plate
8. Place spacers on the plate
9. Apply adhesive to BOTH cuff & plate
9. Apply adhesive to BOTH cuff & plate
10. Use a loose shoe as a top clamping fixture
10. Use a loose shoe as a top clamping fixture
11. Apply clamps to seat Series III cuff on spacers
11. Apply clamps to seat Series III cuff on spacers
12. Wipe excess adhesive and allow to cure
12. Wipe excess adhesive and allow to cure